Common problems and solutions for garment printing?

With the arrival of summer, many heat transfer practitioners have begun to make garment printing. For some experienced friends, the production of clothing printing is relatively simple. But often for some novice friends, clothing printing is still relatively easy to appear a variety of small problems, below, on the editor of the digital printing factory, to introduce the common problems and solutions of clothing printing.

1. The situation of yellowing after garment printing is relatively common, and the reasons that often cause this phenomenon are as follows.

1). Heating time is too long. As we all know, after a long period of high temperature, the clothing will appear yellow. This is mainly determined by the material of the garment and is not unique to thermal transfer technology. Therefore, everyone must pay attention to the time in the production of clothing printing. Usually 20 seconds -25 seconds is enough, don’t increase the heating time privately because you are afraid of the transfer is not complete.
2). The clothing printing has a high cotton content. Many friends are not very familiar with the cotton material. In fact, the clothes we usually see are often low in cotton content, generally 80. The less the amount of cotton, the less likely it is to yellow during the transfer process, but if it reaches 130 or more, everyone should pay special attention to it, and the phenomenon of yellowing of clothing printing often occurs. Therefore, when you choose clothing, you must choose the right one, and do not blindly pursue the cotton content.

2. Image peeling after clothing printing is also common, and most of this problem is caused by the quality of clothing printing paper.

Apparel printing paper must choose some more reliable companies, do not want to be cheap, with some small manufacturers or clothing printing papers of companies that are just beginning to do heat transfer, often cause the loss due to the quality. We generally use Korean-made clothing printing paper, which is recommended for transfer and firmness. Another situation is caused by insufficient pressure on the heat press machine. In fact, this is also a quality problem, so as with the above, if you don’t explain much, you can check it out on the website of FeiYue Digital Technology Co., Ltd.

3. After the clothing printing, the clothing printing is actually no different from the ordinary t-shirt.

It is necessary to pay attention to the fact that it is not exposed to ultraviolet light for a long time (the ink is easily decomposed). When not wearing it, put it in a dry environment to avoid image loss caused by moisture.

The above is basically some of the problems that people often encounter in making garment printing.

Analysis of Factors Affecting Thermal Transfer Quality

Thermal transfer is a process that is an important part of the entire printing process and is closely related to other processes. How to control the stability of this process is an important guarantee for the quality of printed matter. Let’s first look at the important factors affecting the thermal transfer process.

1. Thermal print head

The thermal print head is mainly composed of a surface film protective layer, a bottom film protective layer and a heating element. The heating element is a conductive mesh screen, and the heat generated by the voltage pulse is thermally diffused, so that the ink particles in the image portion are embossed and melted to complete the ink transfer.

The printing speed of thermal transfer depends on the time required for each line of text. Therefore, the thermal transfer head and the transfer paper should have good heat transfer properties, so that the heat generated by the heating element can be quickly transmitted to the surface of the substrate through the protective layer, the transfer paper substrate and the void to ensure that the ink has Enough transfer time.

2. Ink

The composition of the thermal transfer ink is generally three parts of a pigment (pigment or dye), a wax and an oil, wherein the wax is a main component of the thermal transfer ink.

3. Transfer medium

The substrate of the transfer paper is generally divided into a paper substrate, a polyester substrate and a celluloid substrate, and different substrates have different properties, so the following reference factors of the substrate should be noted when selecting the transfer paper.

1) Physical properties

● The thickness of the substrate should generally not exceed 20 μm;
● The substrate should have a high degree of smoothness to ensure the transfer rate of the ink;
● The substrate should have sufficient strength to ensure that it is not torn during transfer paper processing and printing.

2) Chemical properties

The uniform adhesion of the ink is two important manifestations of the chemical properties of the transfer paper substrate. The chemical properties of the transfer paper in production directly affect the quality of the print. If the transfer paper does not allow the ink to adhere well, or if the amount of ink is not well mastered in production, printing waste is caused. A good printing process and good prints must be based on a good grasp of the chemical properties of the transfer paper.

3) Good thermal performance

Since the transfer process is carried out by means of high temperature means, the material of the transfer paper must be able to withstand the influence of the transfer temperature and maintain the properties. In general, the thermal properties of the substrate of the thermal transfer paper are good and can be expressed by the following factors:
● The lower the heat resistance of the heat-resistant substrate, the thinner the thickness, the better the heat transfer, and the better the thermal properties;
● Smoothness The smoother the surface of the substrate, the lower the heat resistance, and the better the thermal performance;
●The heat-resistant thermal head temperature is generally around 300 °C.

4. Substrate

Experience has shown that the print quality of a substrate with a rough surface is better, which is a remarkable feature of thermal transfer. Because the rough surface of the substrate indicates that the substrate has a large surface energy, the ink on the transfer paper can be transferred to the substrate well, and the desired level and tone are obtained. However, too rough will affect the normal transfer of ink, which is not conducive to the realization of the printing process.

Do not hesitate to contact to ORIC teams and give us suggestions, advertise or come to a collaboration agreement. As soon as possible, we’ll be getting in touch with you.