Eco solvent printers do not print well? These 4 points may be overlooked!

The eco-solvent printer is a large-format printing device with high printing accuracy and good color reproduction. With the advancement of technology, the printing speed and printing accuracy of eco-solvent printers have also been greatly improved. The development of China’s advertising industry has led to a significant increase in the demand for printing equipment such as eco solvent printers, and more and more users using eco-solvent printers.

eco solvent printers

Here is a special explanation for the requirements of the pictures in the eco solvent printer.

1. Size

eco solvent printersThe size of the photo image is the same as the actual required picture size. It is different from printing and does not require a bleeding portion. In the inkjet company, there is usually a white border after the output screen, and the general situation is to leave the net screen edge 10CM. You can agree with the inkjet output company, and how many edges are left for buttonholes. The price is calculated per square meter, so the screen size is in centimeters.

2. Image resolution requirements

The general situation requires 72DPI/inch. If the image is too large (such as when the new image shows the actual size of the PHOTOSHOP file size exceeds 400M), you can properly reduce the resolution and control it within 400M.

3. Image mode requirements

The photo is unified using the CMKY mode, and the RGB mode is prohibited. Today’s inkjet printers are all four-color inkjet, and its color is very different from the printing color. Of course, when drawing, follow the printing standards, the inkjet company will adjust the color of the picture and the sample close.

 4. Image black part requirements

eco solvent printersIt is strictly forbidden to have a single black value in the photo image. C, M, and Y colors must be added to form a mixed black. If it is big black, it can be made: C=50M=50Y=50K=100. Especially when using the effect with PHOTOSHOP, be careful to change the black part to four-color black. Otherwise, there will be a black cross on the screen, which will affect the overall effect.

What should you pay attention to when working with large-format eco solvent printers? Please leave a message at the bottom of the article to participate in the discussion.

Leave a Reply

Your email address will not be published. Required fields are marked *