What should I do if the sublimation paper printer has a vertical line during the printing process?

sublimation paper printerSublimation printers will also experience many of the same problems as inkjet printers during long periods of use. For example, when the sublimation paper printer prints out and prints, the image quality is not good, and the vertical line in the print screen of the sublimation paper printer is a common problem.

A flashing line like a test strip that appears in the middle of the screen when printed, with two colors or a lot of messy strips appearing together. How to solve this problem? There is no fixed position of the flashing line, which appears randomly, and flashing lines appear in many places when the screen is printed.

Solve this fault according to different problem points. For vertical inkjet printers where vertical lines appear in the printed picture, the problem is largely on the raster. You can carefully check the grating to check if it is dirty or if the ink drops are stuck on it or if it is scratched. Then clean up and replace the test to solve, there are some ways to help you solve the problem.


sublimation paper printer1. Check the height of the grating decoder from the grating. The upper edge of the grating is preferably 1mm-1.5mm away from the decoder.

2. Wipe in the grating where the vertical line is located, and wipe it with pure cotton with medical cotton.

3. If the above two conditions are invalid, please re-plug the print head data cable, the car board and the motherboard cable.

4. If the above three conditions are invalid, please replace the motherboard or the car board.

I believe that the above steps can perfectly solve the vertical line problem in the textile sublimation printer printing screen.

Leave a Reply

Your email address will not be published. Required fields are marked *