It is well known that the amount of ink produced by a wide format thermal sublimation printer can be adjusted as needed to achieve a variety of different styles of picture. However, when the thermal sublimation printer prints too much ink, it will cause the printing net to be too heavy, the lines are too thick, the printing effect is greatly reduced, and even the material is wasted.
Therefore, if you are experiencing a large amount of ink when the textile sublimation printer is working, you should find the cause and solve the problem in time.
Cause 1: It may be that the amount of control ink in the RIP software (drawing software) is set too high, and the amount of ink can be adjusted by setting.
There is no corresponding option and you need to make settings through the printer’s control panel.
Cause 2: It may also be the cause of the print media. If the print medium is poorly adsorbed and the temperature is extremely low, the coating is not uniform.
Therefore, it is recommended to choose a better print medium, and at the same time properly increase the working temperature of the sublimation paper printer.