In last blog, we talked about what cause DX5 printhead sometimes appear string ink, clogging and ink leakage. The problem with two aspects reasons, if you don’t know clearly, please reading last article. Now, let’s tell you how to solve the problem about print nozzle string ink and clogging ink leakage.
How to reduce chance on string ink clogging ink leakage:
1, relatively speaking, long-term jet printing better than a long time to place the maintenance of the nozzle. Keep ink in the flow state, the nozzle is not easy to jam.
2, the nozzle if you open automatic flushing state (interval of a few seconds spray all spray holes), spray holes are not easy to clog holes.
3, printing work can not last a long time. It will increase the nozzle cavity structure of the load. Especially blocking a certain number of nozzles
4, Different types of nozzles used in the ink pump model is also different. 5113 nozzles have 3200 holes, with 6.5-watt ink pump. DX5 have 1440 head spray Hole with 3-watt ink pump.
5, maintenance of the nozzle, the maintenance of the dish with a layer of sponge on the top of a layer of non-woven fabric, soaked with flushing fluid after the nozzle flat up (cleaning fluid can not be too much, can not be flooded nozzle surface).
6, nozzle installation and removal must take good. Head of the nozzle is very fragile, absolutely can not bump, do protect it. Its surface is a piece of aluminum, the inner layer coated with a crystal oscillator and a very small ink tube. Even a touch may deformed, or even broken.
I hope users can take care above points to avoid those problems. Freely let’s check and discuss with your problems. Maybe we can do some favor.
Our company mainly doing sublimation printing, sale sublimation paper, ink, printer, heat transfer machine and laser cutter ect. If you have any other needs or questions welcome to contact us at any time. We will provide you the best quality product and service. Hope my article can be useful to you. Thank you for your reading.